CO2 Sensors

Specifications :
Dual Beam Absorption Infrared™
Display – LCD
Independent CO2 and Temperature readings.
Calculates and Displays Ventilation Rates
Sample Method:
Diffusion or flow-through (50 – 100 ml/min)
Performance – CO2 Channel
Measurement Range:
0-10,000 ppm display
0-4,000 ppm voltage output
Display Resolution: ± 1 ppm
Accuracy: ±50 ppm or ±5% of reading up to 5,000 PPM (Above 5,000 PPM not specified)
Repeatability: ±20 ppm
Temperature Dependence: ±0.1% of reading per °C or ±2 ppm per °C, whichever is greater, referenced to 25°C
Pressure Dependence: 0.13% of reading per mm Hg (Corrected via user input for elevation)
Response Time: <60 seconds for 90% of step change
Warm-Up Time: <60 seconds at 22°C
Calibration Interval: 12 months, offset adjustment using single gas at 0-1000 ppm CO2. Full factory calibration available
Performance – Temperature Channel
Temperature Range:
Voltage output 32 to 104°F (0 to 40°C)
Display 32 to 122°F (0 to 50°C)
Display Resolution: 0.1°F (0.1°C)
Display Options: °F, °C, or Off. Set with panel button.
Accuracy: ±2°F (±1°C)
Response Time: 20-30 minutes (case must equilibrate with environment)
Calibration Interval: 12 months, offset adjustment using temperature standard at 50 to 86°F (10 to 30°C).
Full factory calibration available
Outputs: (Analog) CO2 0-4 VDC, 1mV/ppm (4,000 ppm max)
Temperature: 0-4 VDC linear, 32-104°F (0-40°C)
Output Impedance: 100 Ohms (Digital)
RS232 for use with Telaire® CO2View™ Graphing Software (Wiring Connection)
One RJ-45 Connector
Dual Analog output plus digital output
Power Supply
Battery Type: Four AA batteries, not included
Battery Operation: 80 hours (alkaline)
External: 6 VDC from external AC/DC adapter, included
Power Requirements: 100 mA Peak, 20 mA average from 6V

General:
Operating Conditions: 32-122°F (0-50°C)
0-95% RH, non-condensing
Storage Temperatures: -4 to 140°F (-20 to 60°C)
Certifications: FCC Class 15 Part B, CE