Air Tightness Leak Detector Tester ZH500

Features :

By filling compressed air of specified pressure into the measured object (product), this instrument detects whether there is leakage according to the change of its internal pressure.
Firstly, the leak detector fills the measured object with the regulated gas, and then stops the inflation to maintain pressure.
During the pressure maintaining process, it senses the pressure drop caused by leakage, that is, direct pressure leakage rate, through a high sensitivity pressure sensor.

Specifications :

Main models and technical parameters
Direct pressure sensor	Recommended Test pressure Range	ZH500	Mechanical pressure regulating	10KPa~500KPa
		ZH1000	Mechanical pressure regulating	50KPa~1200KPa
		ZH2400	Mechanical pressure regulating	50KPa~2400KPa(optional)
		ZH600-X (multi-station)	Mechanical pressure regulating	10KPa~500KPa(optional)
	Sensor error	±0.1%F.S.
Display Unit	Test pressure	KPa,MPa,kg/cm²,psi,mbar, bar, Torr, mmH_{2O, mmHg}
	Leakage	Pa,kPa,Pa/s,kPa/s,kPa/min,mL/s, mL/min,mL/h,L/min,L/h,SCCM
Parameter program number	Other	64 groups (1~64)
	ZH600-X(multi-station)	64 groups (A/B/C/D each channel can set 16 groups of parameters program)
Test Beat Setting	0 ~ 999 seconds, test time 1800 seconds
Power Supply	AC 220V±10%,50Hz
Test Pressure Source	Clean, dry, adequate flow, not less than 500KPa and 100KPa above the test pressure source
Overall dimensions	460mm×328mm×222mm
Weight	14kg

Catalog : PDF

Brand

There are no reviews yet.

Be the first to review “Air Tightness Leak Detector Tester ZH500”