Specifications :
| Water Inlet | Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm) |
| Temperature | 5-45°C |
| Pressure | 1.0-4.0 Kgf/cm² |
| Flow Procedure** | PF+KDF+AC+RO+RO+AC+DI+TF |
| Bacteria | <0.1 cfu/ml |
| Output(25°C)**** | 15-20 L/hr |
| Pure water outlet | 2nd stage RO and Deionized water |
| DimensionLxWxH | 500×360×540 mm |
| Weight | 25 kg |
| Standard configuration | Main body (Including 1 set of cartridges)+ assorted tank (built-in tank+15 liters external tank)+ accessory bag |
| Power Consumption (W) | 120 W |
| Power Supply | AC110-220 V, 50/60 Hz |
| Note | *The feed water quality will influence the pure water´s quality and cartridges´ life-span. ** PF:polypropylene spun fiber, KDF:kinetic degradation fluxion, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, UF:ultrafiltration, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate. |
| Resistivity | >16-18.2 MΩ.cm |
| Conductivity | – |
| Particle(>0.2µm) | <1/ml (with terminal filter ) |
| 1st stage RO water’s TDS | TDS (ppm,mg/l) < TDS of tap water x 5% |
| 2nd stage RO water’s conductivity | 1-5 µs/cm, Organic rejection rate>99% (when MW>200 Dalton), Particles and bacteria rejection rate>99% |
| Heavy metal ion | <0.1 ppb |
| Flow rate | 2.0 L/min (with pressure tank) |
Catalogue : PDF
Reviews
There are no reviews yet.