Specifications :
| Feed Water Requirements*: | |
| Water Inlet | Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm) |
| Temperature | 5-45°C |
| Pressure | 1.0-4.0 Kgf/cm² |
| Bacteria | <0.1 cfu/ml |
| Output(25°C)**** | 10 L/hrs |
| Pure water outlet | 2:Electro Deionization water, ultrapure water |
| Water Quality Monitor | – |
| DimensionLxWxH | 500×360×540 mm |
| Weight | 30 kg |
| Standard configuration | Main body (Including 1 set of cartridges) + 20 liters tank+accessory bag |
| Power Consumption (W) | 120 W |
| Power Supply | AC110-220 V, 50/60 Hz |
| Note | *The feed water quality will influence the pure water´s quality and cartridges´ life-span. **PF:polypropylene spun fiber, KDF:kinetic degradation fluxion, AC:active carbon, RO:reverse osmosis, SF:softener, EDI: electro deionization, UV:ultraviolet, DI:ion exchange, UF:ultrafiltration, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate. |
| Ultrapure Water Quality: | |
| Heavy Metal Ion | <0.1 ppb |
| TOC*** | <30 ppb |
| Endotoxin | <0.001 EU/ml |
| Rnases | 0.01 ng/ml |
| Dnases | <4 pg/µl |
| Feed Water Requirements: | |
| Resistivity (25°C) | 18.2 MΩ.cm |
| TOC* | – |
| Particle (>0.1µm) | <1/ml |
| Flow procedure** | PF+KDF+AC+RO+SF+EDI+UV+DI+UF+TF |
| EDI water quality: | |
| Resistivity*** | >5 MΩ.cm |
| Silicon rejection rate | >99.9% |
Catalogue : PDF
See more products BIOLAB brand.
Reviews
There are no reviews yet.