Specifications :
|
Physical Specifications |
|
| Power requirements | 220V,50HZ |
| Ambient temperature | 4-40℃ |
| Ambient humidity | 20-85% relative humidity(non-condensing) |
|
System features |
|
| Qualitative repeatability(Retention time) | RSD≤0.3% |
| Quantitative repeatability(Area) | RSD≤0.6% |
|
Pump |
|
| Flow Rate Range | 0.0001-10.000mL/min( increments :0.0001 mL/min) |
| Max operating Pressure | 42MPa |
| Pressure Pulsation | <0.1MPa( Test condition: 10MPa , at 1.0ml/min methanol) |
| Flow Accuracy | ±0.2%( Test condition: 10MPa , at 1.0ml/min methanol) |
| Flow Precision | RSD≤0.06%( Test condition: 10MPa , at 1.0ml/min methanol) |
| Gradient Accuracy | ±1% |
| Column Oven | |
| Temperature Setting Range | 5 °C ~ 85 °C |
| Temperature Stability | ≤0.2°C/h |
| Temperature Controlling Precision | ±0.1 °C |
|
Autosampler |
|
| Injection Volume Precision | <0.25%RSD( full loop) <0.5%RSD( partial loop) <1%RSD( no waste) |
| Linearity | >0.999 |
| Cross Contamination(Carry Over) | <0.01% |
| Sample Capacity | 120 samples( 1.5ml vials) |
| Syringe | 250 μL( Standard, with 500μL,1000μL, 2500μL optionals) |
| Sample Loop | 20μL( Standard, with 50μL, 100μL, 200μL optional) |
| Optional Sample Chamber Cooler | 4 °C ~ 30 °C(4 °C lowest) |
|
FLD Detector |
|
| Noise | 1.5×10-5Au |
| Drift | ≤2×10-4Fu/30min |
| LOD | 5.0×10-10g/mL (naphthalene/methanol) |
| Wavelength Range | 200-650nm |
| Wavelength Accuracy | ±2 nm |
| Wavelength Reproducibility | ±0.2 nm |
| Linearity | ≥1.0×104 |
Catalog : PDF
Reviews
There are no reviews yet.