Specifications :
| Water Inlet | Tap water: TDS<200 ppm (Extra pretreatment filter is recommended if TDS>200 ppm) |
| Temperature | 5-45°C |
| Pressure | 1.0-4.0 Kgf/cm² |
| Flow Procedure** | – |
| Ion rejection rate | 96%-99% (New RO membrane) |
| Organic rejection rate | >99%,when MW>200 Dalton |
| Particles and bacteria rejection rate | >99% |
| Output(25°C)**** | 10 L/hrs |
| Pure water outlet | 2: RO water, Electro Deionization water |
| DimensionLxWxH | 500×360×540 mm |
| Weight | 25 kg |
| Standard configuration | Main body (Including 1 set of cartridges) + 20 liters tank+accessory bag |
| Power Consumption (W) | 120 W |
| Power Supply | AC110-220 V, 50/60 Hz |
| Note | *The feed water quality will influence the pure water´s quality and cartridges´ life-span. **PF:polypropylene spun fiber, KDF:kinetic degradation fluxion, AC:active carbon, RO:reverse osmosis, SF:softener, EDI: electro deionization, UV:ultraviolet, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate. |
| TOC*** | <30 ppb |
| Flow procedure** | PF+KDF+AC+RO+SF+EDI |
| Resistivity*** | >5 MΩ.cm |
| Silicon rejection rate | >99.9% |
Catalogue : PDF
Reviews
There are no reviews yet.