Double stage RO ultrapure Water System BK3WPS21- 094UVF

Specifications :

Water Inlet Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
Temperature 5-45°C
Pressure 1.0-4.0 Kgf/cm²
Flow Procedure** PF+AC+RO+RO+(UV)+AC+DI+(UF)+TF
Bacteria <0.1 cfu/ml
Output(25°C)**** 1st stage RO water: 94 L/hr, 2nd stage RO water: 45 L/hr
Pure water outlet 1st, 2nd stage RO and Ultrapure water
DimensionLxWxH 760×630×1190 mm
Weight 80 kg
Standard configuration Main body (Including 1 set of cartridges) + built-in 2 tank (40L PE tank+2 gallon pressure tank)+ accessory bag
Power Consumption (W) 300 W
Power Supply AC110-220 V, 50/60 Hz
Note *The feed water quality will influence the pure water´s quality and cartridges´ life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, UF:ultrafiltration, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.
Resistivity(25°C) 18.2 MΩ.cm
Heavy Metal Ion <0.1 ppb
TOC*** <3 ppb
Particle (>0.2µm) <1/ml
Endotoxin <0.001 EU/ml
Rnases <0.01 ng/ml
Dnases <4 pg/µl
1st stage RO water’s TDS TDS (ppm, mg/l) < TDS of tap water x 5%
2nd stage RO water’s conductivity 1-5 µs/cm, Organic rejection rate>99% (when MW>200 Dalton), Particles and bacteria rejection rate>99%

Catalogue : PDF

Reviews

There are no reviews yet.

Be the first to review “Double stage RO ultrapure Water System BK3WPS21- 094UVF”

Your email address will not be published. Required fields are marked *

Scroll to Top