Specifications :
| Feed Water Requirements*: | |
| Water Inlet | Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm) |
| Temperature | 5-45°C |
| Pressure | 1.0-4.0 Kgf/cm² |
| Flow Procedure** | PF+AC+RO+AC |
| Ion rejection rate | 96%-99% (New RO membrane) |
| Organic rejection rate | >99%, when MW>200 Dalton |
| Particles and bacteria rejection rate | >99% |
| Bacteria | <0.1 cfu/ml (with optional 0.2µm PES terminal filter) |
| Particles(>0.2µm) | <1/ml (with optional 0.2 µm PES terminal filter) |
| Output(25°C)**** | 45 L/hr |
| Pure water outlet | RO water |
| Water Quality Monitor | Portable TDS/conductivity test pen + on-line conductivity monitor |
| DimensionLxWxH | 640×540×1110 mm |
| Weight | 70 kg |
| Standard configuration | Main body (Including 1 set of cartridges)+ 2 built-in15 liters tank+ TDS pen +accessory bag |
| Power Consumption (W) | 120 W |
| Power Supply | AC110-220 V, 50/60 Hz |
| Note | *The feed water quality will influence the pure water´s quality and cartridges´ life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis. ***All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate. |
Catalogue : PDF
See more products BIOLAB brand.
Reviews
There are no reviews yet.