Specifications :
| Feed Water Requirements*: | |
| Â Â Â Â Â Â Water Inlet | Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm) |
|       Temperature | 5-45°C |
|       Pressure | 1.0-4.0 Kgf/cm² |
| Flow Procedure** | PF+AC+RO+AC+DI+UF+TF |
| Ion rejection rate | 96%-99% (New RO membrane) |
| Organic rejection rate | >99%, when MW>200 Dalton |
| Particles and bacteria rejection rate | >99% |
| Bacteria | <0.1 cfu/ml |
| Output(25°C)**** | 63 L/hr |
| Pure water outlet | RO water and Ultrapure water |
| Water Quality Monitor | – |
| DimensionLxWxH | 640×540×1110 mm |
| Weight | 70 kg |
| Standard configuration | Main body (Including 1 set of cartridges)+ 2 built-in15 liters tank +accessory bag |
| Power Consumption (W) | 120 W |
| Power Supply | AC110-220 V, 50/60 Hz |
| Note | *The feed water quality will influence the pure waters quality and cartridges life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, UF:ultrafiltration, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed waters TDS=200ppm, 25°C, 50psi and 15% recovery rate. |
| Deionized water quality: | |
|       Particle(>0.2µm) | <1/ml |
| Ultrapure Water Quality: | |
|       Resistivity(25°C) | 18.2 MΩ.cm |
| Â Â Â Â Â Â Heavy Metal Ion | <0.1 ppb |
| Â Â Â Â Â Â TOC*** | <10 ppb |
|       Particle (>0.2µm) | <1/ml |
| Â Â Â Â Â Â Endotoxin | <0.001 EU/ml |
| Â Â Â Â Â Â Rnases | <0.01 ng/ml |
|       Dnases | <4 pg/µl |
Catalogue : PDF
See more products BIOLAB brand.
Reviews
There are no reviews yet.