Specifications :
Water Inlet | Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm) |
Temperature | 5-45°C |
Pressure | 1.0-4.0 Kgf/cm² |
Flow Procedure** | PF+AC+RO+RO+AC |
Output(25°C)**** | 1st stage RO water: 63 L/hr, 2nd stage RO water: 30 L/hr |
Pure water outlet | 1st and 2nd stage RO water |
DimensionLxWxH | 760×630×1190 mm |
Weight | 80 kg |
Standard configuration | Main body (Including 1 set of cartridges) + built-in 2 tank (40L PE tank+2 gallon pressure tank)+ accessory bag |
Power Consumption (W) | 300 W |
Power Supply | AC110-220 V, 50/60 Hz |
Note | *The feed water quality will influence the pure water´s quality and cartridges´ life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, UF:ultrafiltration, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate. |
1st stage RO water’s TDS | TDS (ppm, mg/l) < TDS of tap water x 5% |
2nd stage RO water’s conductivity | 1-5 µs/cm, Organic rejection rate>99% (when MW>200 Dalton), Particles and bacteria rejection rate>99% |
Catalogue : PDF
Reviews
There are no reviews yet.