Pin Plug Digital Paper Moisture Meter DRK112

Features :

1.Inspection before measurement:
Unplug the instrument cap, touch the probe to the two contacts on the cap, and press the test switch. If the display is 18±1 (when the correction gear is 5), it means the instrument is in a normal state.
2.Gear setting method:
According to the tested paper, according to the recommended attached table to find out the gear that should be set. First press and hold the type setting button, and then press the test switch “switch” at the same time. At this time, the current gear setting value will be displayed and the decimal in the lower right corner will light up. Press the type setting button continuously to change the gear to the desired level. Position, let go of the two buttons, and the setting is complete. After turning on the machine, the set gear will be maintained until it is changed again.
3.Measurement:
Insert the electrode probe into the paper sample to be measured. Press the test switch, the data indicated by the LED digital tube is the average absolute moisture content of the test piece. When the measurement value is less than 3, it will display 3.0, and when the measurement value is greater than 40, it will display 40, indicating that the range has been exceeded.