Specification:
Applications for Plant Management
• Monitor frost temperatures for real-time decisions to protect crops
• Track soil moisture and EC in numerous locations for better irrigation practices
• Record temperature and humidity for decisions regarding disease and insect pressure
Network Components
WatchDog Retriever
Retriever logs sensor data from its network of Pups (max 16 Pups per network).
- Single button operation: switch modes, download data, upload configuration, and check battery status
- Tri-colored LEDs indicate mode, battery level, data communication status, and configuration status
- Non-volatile memory preserves your logged data, even when the batteries are removed
- Transfer data or configuration information via flash drive or direct PC connection
- Internal flash memory on the Retriever will hold approximately 6 months of data for a 10 Pup network using 15 minute logging intervals
- Spectrum-supplied USB flash drive will hold several years of data at the Retriever for a 10 Pup network using 15 minute logging intervals
- 3.5mm stereo port for computer connection USB cable (included)
- AUX port for wireless (DataScout Cellular or WiFi modem) communication connection
- Includes six non-rechargeable AA batteries (8 months typical life)
- DC port for optional AC/DC power adapter (Max 17VDC)
- Optional solar package includes rechargeable battery pack (2200 mAh, 7.2V NiMH), and 5W solar panel
- Retrievers are available in both 900 MHz (US customers) and 2.4 GHz bands (international customers)
- Retriever & Pups Launch Utility software included on USB flash drive
WatchDog Pups
Each Sensor Pup within the network is compatible with a diverse number of sensors and offers flexibility by allowing the grower to monitor the sensor inputs they require.
- Pups are available in 3 types: Sensor Pup, Station Pup, and Repeater Pup
- Single button operation: check battery status, signal strength, and join sensor network
- Tri-colored LEDs indicate battery level, signal strength, and data communication status
- Includes six non-rechargeable AA batteries (8 months typical life)
- Communication range of 2,500 ft (about 1/2 mile), line-of-sight installation recommended between Pups or Retriever
- Pups are available in both 900 MHz (US customers) and 2.4 GHz bands (international customers)
WatchDog Sensor Pups
- Connect up to 4 external sensors via 2.5mm stereo-plug
- Can monitor high, low, current, and average values for each sensor during each logging period
WatchDog Station Pups
- Connects to your existing WatchDog 2000 Series Full and Mini Weather Stations
- Sends all Weather Station sensor data to your Retriever network
- No external sensors, can only be connected to another device
WatchDog Repeater Pups
- Provide added range to WatchDog Retriever networks
- Serves as a “hopping node” around buildings or obstacles, or over high sections of your fields
- No external sensors can be connected
Detailed Product Information
External Sensors
- Customize each WatchDog Pup to monitor only the parameters you need
- Most Spectrum sensors are Pup-compatible, including :
- Soil Moisture Sensors (WaterScout SM 300, WaterScout SMEC 300, and Watermark sensors)
- LightScout Light Sensors (Solar Radiation, UV, and Quantum light)
- Leaf Wetness Sensors
- Temperature and Humidity Sensors
- Barometric Pressure Sensors
- CO2 Sensors
- Reliable, waterproof IP65 enclosure
- Weatherproof glands for sensor cables
- Lockable front door with the use of a padlock (not included)
- Mounting bracket allows vertical or horizontal orientation
- Mounting hardware included – 1-¼ inch U-bolt
- Antenna connection can be extended for higher placement for additional range between Pups & Retriever (antenna extension sold separately)
Communication Options
- USB flash drive (included with all Retrievers)
- Cellular network (See DataScout™ Modems below)
- Wi-Fi (see DataScout Modems below)
DataScout Modem (optional)
Communicates data to the web via Cellular or Wi-Fi options (more information on SpecConnect Web Portal can be found here)
- Model 110 CMDA Cellular Modem (US customers) with Solar Power (includes Modem, Solar Panel, and Rechargeable Battery Pack)
- Model 120 GSM/GPRS Cellular Modem (International customers) with Solar Power (includes Modem, Solar Panel, and Rechargeable Battery Pack)
- Model 130 HSPA+ Cellular Modem (Canada customers) with Solar Power (includes Modem, Solar Panel, and Rechargeable Battery Pack)
- Model 140 Wi-Fi Modem with Solar Power (includes Modem, Solar Panel, and Rechargeable Battery Pack)
- Model 140 Wi-Fi Modem with AC/DC Power (includes Modem and AC/DC Power Cord)
Configuration
- PC-based Retriever & Pups Launch Utility
- Pre-loaded onto the provided USB memory stick
- Configuration Parameters
- Logging and upload intervals
- Pup names
- Sensor choices
- Calculated sensor parameters (high / low / average)
- Data transfer and configurations may be done by
- USB memory stick
- Computer cable
- SpecConnect web portal (subscription purchased separately)
- Pup configuration completed at Retriever and sent wirelessly to Pup network – Pups do not have a computer interface
- Spec 9 Pro or Basic Software not required, unless transferring data files/history to your PC
Capacity
- Measurement intervals: 5, 10, 15, 20, 30, or 60 minutes
- Non-volatile internal memory helps preserve data
- Pups – When communication is interrupted, internal memory buffers sensor data until reconnection to the Retriever is achieved
- Retriever – Will hold approximately 6 months of data for a 10 Pup network using 15 minute logging intervals
- Spectrum-supplied USB memory stick – 4GB
- Will hold several years of data at the Retriever for a10 Pup network using 15 minute logging intervals
- Can use other customer-supplied USB drives
Reviews
There are no reviews yet.